Philips 2000 Series AC2882 Air Purifier (White)
Rs. 19995.0000 In Stock
Check your Delivery Status


Philips 2000 Series AC2882 Air Purifier (White)

Brand: Philips

Product Code: AC2882

Availability: In Stock


:
Key Features:
  • Vita shield IPS technology with natural filtration and dedicated pollution, allergen and bacteria/virus auto modes
  • Covers room size of upto 851 square feet
  • CADR (Clean Air Delivery Rate) of 333 m3/hour
  • 100 percent ozone free
  • Warranty: 2 years on product

:
    Easy Returns | Brand New | 100% Original | Pay Securely

Price: Rs.19,995

The images represent actual product though color of the image and product may slightly differ.

Healthier Air, Always
3 smart ways to optimize your purification

Low noise at Sleep Mode (20.5dba) - soft as a whisper
When in Silent Mode, the Purifier turns down its fan speed and noise level to allow a comfortable night's sleep. The lights on the Purifier can also dimmed and/or turned off to suit your preference.

Smart light control: adjust light to suit your preference
Both AQI and the light on the UI can be dimmed and/or turned off avoid light disturbance for consumers.

3 smart presettings for different airborne pollutants
Indoor PM2.5 levels can increase far above local guidelines because of activities like cooking. Our advanced sensing technology - AeraSense, accurately detects invisible indoor air pollutants in real time, and then auto-boosts the Air Purifiers speed to reduce harmful particles, gases, for a cleaner air output.

Healthy air lock and alert for filter replacement
With advanced AeraSense technology, the filter lifetime is accurately calculated based on indoor pollution level, air flow and operation time. The healthy air protect alert lets you know promptly when it is time to replace the filter. If the filter is not replaced promptly, the appliance stops functioning - to avoid ineffective purification. So you are assured of healthier air always.

VitaShield naturally purifies UFP as small as 0.02microns
Vitashield IPS with its aerodynamic design and NanoProtect Filter has a boosted clean air delivery rate up to 344 m3/hr* (according to China GB/T 18801-2015). It can effectively remove ultra-fine particles as small as 20nm, effectively reduce harmful gases such as formaldehyde, TVOC and odor. Removes up to 99.9% bacteria and virus*.

Aerodynamic architecture boosts efficient airflow

3 smart presettings for different airborne pollutants
Bacteria & Virus particles are the ones seldom detected by air sensors. Hence the most effective way to reduce these particles is to significantly boost the airflow and increase the air exchange per hour. This mode boosts the Air flow, then the high quality HEPA filter in the Purifier effectively captures the bacteria and virus by 99.9%, ensuring cleaner air output.

Design and finishing
Air Quality Sensor(s) Aerasense PM2.5 sensor
Color Of Control Panel Black
Color(s) Beige
Fan Speed Indicators Silent, Speed 1, 2, 3, Turbo
Material Of Main Body Plastic
Dimensions
LxWxH 359 x 240 x 558 mm
Performance
CADR (cigarette Smoke) 324 m
CADR (formaldehyde) 115 m
Filters Out Bacteria in 0.5 hr, 99.9 %
Filters Out PM2.5 in one hour, >99 %
Sustainability
Stand-by Power Consumption <0.5 W
Technical specifications
Cord Length 1.6 m
Effective Area 22-38 m
Frequency 50/60 Hz
Power 11~60 W
Sound Level 20.5-52 dB(A)
Voltage 220 V

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: